Waldent Carbide Burs HP – B1

550.00

Description

Waldent Carbide Burs are especially designed tungsten carbide burs used in trimming of acrylic or metal dentures , crowns (PFM , Cermamic, Metal , etc)

Superior quality burs have a broad & fine cross cut for smooth cutting of the material.

Different codes along with their shapes are meant for trimming different areas of the dentures or crowns.

Benefits of the Double Cut (DC) flute include rapid removal of a broad range of materials combined with excellent operator control. It does this by incorporating a positive cutting rake angle that gives great “bite” into the material and yet,­­­ is not so aggressive that the operator fatigues quickly after using it in a hand piece. The steel shanks are ground, which sets them apart from our competitors. The solder joints are clean, with no excess solder gaping out from the sides between the carbide bud and the shank

Out of stock

Description
Reviews (0)

Description

Waldent Carbide Burs are especially designed tungsten carbide burs used in trimming of acrylic or metal dentures , crowns (PFM , Cermamic, Metal , etc)

Superior quality burs have a broad & fine cross cut for smooth cutting of the material.

Different codes along with their shapes are meant for trimming different areas of the dentures or crowns.

Benefits of the Double Cut (DC) flute include rapid removal of a broad range of materials combined with excellent operator control. It does this by incorporating a positive cutting rake angle that gives great “bite” into the material and yet,­­­ is not so aggressive that the operator fatigues quickly after using it in a hand piece. The steel shanks are ground, which sets them apart from our competitors. The solder joints are clean, with no excess solder gaping out from the sides between the carbide bud and the shank

 

Waldent carbide burs are compatible with Straight Handpiece only!

STANDARD BURS (Blue):

Waldent Carbide Burs WL – 1 Flame shaped Standard Bur:

This flame shaped bur with cross cut is ideal for use in denture trimming & setting.

Waldent Carbide Burs WL – 2 Cone shaped with pointed end Standard Bur:

This cone shaped bur with pointed end & cross cut is ideal for use in cutting the part of the denture sharply with the pointed tip.

Waldent Carbide Burs WL – 3 Cone shaped with blunt end Standard Bur:

This cone shaped bur with blunt end & cross cut is ideal for use in cutting small parts of the dentures

Waldent Carbide Burs WL – 4 Needle shaped Standard Bur:

This needle shaped bur with cross cut is ideal cutting the chunks of denture material interdentally

Waldent Carbide Burs WL – 5 Cone shaped Standard Bur:

This cone shaped bur with cross cut is allows efficient & fast cutting of the denture material

COARSE BURS (Green):

Waldent Carbide Burs WL – 6 Cone shaped Coarse Bur:

This cone shaped bur with cross cut is ideal for cutting faster cutting of denture material

Waldent Carbide Burs WL – 7 Cone shaped with pointed end Coarse Bur:

This cone shaped bur with pointed end cross cut is ideal for sharp cutting of denture material

SUPER COARSE (Black):

Waldent Carbide Burs WL – 8 Needle shaped Super Coarse Bur:

This needle shaped bur with cross cut is ideal for sharp cutting of denture material

FINE (Red):

Waldent Carbide Burs WL – 9 Barrel shaped Fine Bur:

This barrel shaped bur with cross cut is ideal for fine or minor cutting of denture material

Waldent Carbide Burs WL – 10 Flame shaped Slim Fine Bur:

This flame shaped bur with cross cut is ideal for trimming small portions of denture material

EXTRA FINE (Yellow):

Waldent Carbide Burs WL – 11 Cylindrical Barrel Extra Fine Bur:

This Cylindrical Barrel shaped bur with extra fine cross cut is ideal for extra fine finishing & polishing of denture material

Features

Quality:

  • Superior quality burs have a broad & fine cross cut for smooth cutting of the material.

Codes & precise shapes:

  • Different codes along with their shapes are meant for trimming different areas of the dentures or crowns.

Color Codings:

  • Differenct colors have been provided to identify the bur being coarse , medium or fine

Maximum speed with fine grip:

  • Burs can be used at maximum speed for fast cutting & has a fine grip which with-holds the bur in the straight handpiece tightly
Key Specifications

TECHNICAL SPECIFICATIONS:

  • Speed RPM : 15’ – 25000
  • Diameter Ø: 2.3mm
Packaging
  • Pack of 1 Burs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.